NETDRAIN waterproofing protection drainage sheets are made up of HDPE (High Density Polyethylene). It both keeps away the ground water from the curtain (fondation ) wall and prevents possible damages that may occur on the waterproofing during the backfilling. It is also used as a slab layer and in roof gardens. It is economical, saves time and protects your waterproofing from mechanical damages. NETDRAIN dimpled membranes are HDPE and can resist to pressure (>250kN/m²) and chemicals under soil. NETDRAIN perfectly protects your waterproofing from mechanical damages during backfilling, is used as a slab layer or on the foundation wall. Thanks to the lineer positioning of the dimples, it drains much more water than its diagonal competitors thus helps remove more water in a given unit time.

Tefond provides fast and perfect application with its special and unique mechanical “zipping” system and bituminous tape. It is widely used on foundation walls, roof gardens, tunnels, water canals, railways and highways. Furthermore, it decreases the overlapping waste and provides perfect waterproofing system. Why a HDPE Membrane ? A Primary target of modern engineering research is to safely protect,waterproof and insulate buildings from dampness. Building designers who want assurance can not be satisfied with common waterproofing systems: that’s why HDPE membrane has been created. HDPE membrane is a high density polyethylene product ,resistant to impacts and to the attacks of chemical agents; thanks to the stud characterising its surface, it also allows the ventilation and drainage of the surfaces covered for protection.

Maxistud is the technological answer to all situations where extra drainage capacity is required. This is particularly important when Maxistud is used as a protection of the bituminous membrane because there is no hydrostatic pressure on it. With Maxistud there is no wash-out of concrete during the installation process, which in turn enables to save money. Main applications: permanent shutteringapplications; ground water protection; easier and quicker construction of the slab foundations. Maxistud F is a high density extruded polyethylene (HDPE) membrane with holes.Maxistud F provides membrane protection and acts as a "controlled" water reservoir.20 mm dimples feature a wide base area that doesn't penetrate the waterproof membrane; holes let the excess trapped water to drain quickly

A Green Roof gives instant increase to the value of a property without increasing its size. Adding a green area improves living and working surroundings. A reduction is possible on drain diameter and sewage charges because much of the rainwater is recycled into the irrigation system of a Green Roof. The excellent insulating properties of a Green Roof keep buildings warmer in winter and cooler in summer, cutting heating and air conditioning costs. Noise and particle pollution is cut. The building stucture and its conventional insulation gains a longer life span. A green roof indicates the building owners concern for the environment.

The use of geosynthetics in construction applications has long been recognised as a cost-saving and performance-enhancing solution versus classical construction techniques. Damage resistance during installation.The primary challenge facing any geotextile is to survive the harsh installation conditions, and to remain undamaged. 95% of all damage to a geotextile typically occurs during installation. Only those that survive the severe initial installation stresses will live on to perform the functions for which they have been designed. DuPont TM Typar® SF is a nonwoven geotextile which provides superb performance in all directions, mirroring in-use oads. DuPont quality manufacturing and DuPont TM Typar® SF process control ensure excellent product uniformity, thereby guaranteeing consistent performance over the entire geotextile roll. The permeability of a soil-geotextile system is dictated by the permeability of the soil itself. DuPont TM Typar® SF is generally more permeable than the soil*, therefore it suits perfectly for filtration.

Kmat immedialy protects the "denuded" soil from erosion. As the root system grows and develops it binds Kmat to the substrade, turning the vegetal layer into "armoured grassland". Kmat protects the dry banks of canals and ditches from rainfall erosion and the wet bans from water current erosion. Kmat drastically reduces the frequency of ditch and canal maintenance and reshaping works by anhancing their stability. Because of its special structure it retains the soil.On top of that,the synthetics layer lends added resistance to the reinforced geomat,turning Kmat RF into an solution for capping waste dumps.

Every time we design or construct a building we have to bear in mind how the new building will interact with the soil and what possible consequences this may entail.The presence or water inside the soil is the most frquuent and indeed the most important problem,which needs to be tackled in order to avoid further problems during and after building works.Correct water drainage and suitable waterproofing help prevent structural problems and help extend the life of buildings and improve their conditions of use. Today,thanks to modern production tecnologies,we can abandon traditional drainage systems that use aggregate, which is an increasingly rare and precious material,and use modern draining geo-compounds instead. Leader of its category of products in terms of performance and reliability,Qdrain is a comprehensive range of draining geo-compound products specifically developed and produced by TeMa to meet even the most specific and demanding requirements.

XGrid offers a complete range of geogrids, available in different types and strengths, capable of addressing any soil reinforcement issue. XGrid geogrids have been developed by TeMa in consultation with reliable, experienced manufacturers specially selected from among the best in the global market. These partnerships, based on a shared dedication to the highest quality and service, guarantee customers the best products supported by technical expertise and driven by a commitment to innovation and continuous improvement. By offering project support and the right product TeMa delivers fast, effective solutions for any soil reinforcement problem, ranging from the stabilisation of slopes with reinforced earth support, to reinforcing road surfaces and bases as well as road and rail embankments.

Geocell (cellular confinement system) is a system of smooth, surface-patterned (textured) or perforated PE–HD strips (50, 75, 100, 150, 200, 250 mm in depth) connected in a series with collateral root penetrations vertical to the longitudinal axis. After dilatation and stabilization, the connected strips form walls of spatial flexible cells. Subsequently, these cells are filled with filling material (chosen according to the purpose of use and surface load): sand, gravel, earth, crushed stone, concrete, refuse excavated from the construction site, etc.

We are the sole distributor of TEXAS (HK) in Turkey, world’s leading fiberglas mesh producer. TEXAS exports not only Turkey but also the US, the EU countries, Spain, Italy and New Zealand. Texas Fiberglas mesh is the only fiberglas mesh from China that owns ISO certificate from Far East. Texas Fiberglass Mesh is woven from 100 % glassfiber and then coated by a special solution for alkali resistancy. It is resistant to alkali that may rotten the mesh in the plaster. NET TAPE self adhesive mesh tape is 3,2mmX3,2mm and 50mmX90mt and 100mmX90mt in rolls. Please contact us for special size requirements.

Deccofix decoration profiles offers great solutions for your needs in your construction details. Deccofix door cover trims and parquet edge profiles bring an aesthetic solution to the different level problems in floor coverings with a variety of patterns (anodised aluminium or parquet pattern designs). Besides these products, Net Yapı has special products for tile profiles (internal, external and border tile profiles), Stair nosings, Tile expansion profiles, corner guards and skirting profiles. All aluminium profiles are available in silver, gold and bronze anodised color . Please do not hesitate to contact with us for your special profile needs.

The main object of leaving expansion gaps is to prevent the damages caused by the expansion, contraction or horizontal movements in the building. Thus, great importance should be given for the profile choice. Wrong preference may cause cracks on the surface or even serious breaks at the edges. One should answer the below in order to choose the right profile. DILAFIX profiles are extruded from ISO and TSE certificated ETIAL 60 (ALGMSI 0,5 F 22) quality aluminium and resistant to pressure and friction. The fittings used in DILAFIX® profiles are ISO and TSE certificated and produced from EPDM in line with DIN norms. They are all resistant to chemicals, tearing and abrassive effects. All our technical staff is ready to serve you with your different demands on profiles.